2024
- T. Shiraiwa, K. Yasuda, F. Briffod, M. H. Jhon, F. Gunawan, R. Sahay, N. Raghavan, A. S. Budiman, M. Enoki:
"Materials informatics approach to Cu/Nb nanolaminate microstructure correlations with yield strength and electrical conductivity"
Materials Transactions (in press)
- D. Kuriki, F. Briffod, T. Shiraiwa, M. Enoki:
"Evaluation of fatigue properties in flame-resistant magnesium alloy welded joints by crystal plasticity analysis and data science approach"
Journal of The Japan Institute of Light Metals 74 (2024) 91–98
- H. Hu, F. Briffod, W. Yin, T. Shiraiwa, M. Enoki:
"Quantitative investigation of slip band activities in a bimodal titanium alloy under pure fatigue and dwell-fatigue loading"
International Journal of Fatigue 182 (2024) 108203
- F. Briffod, Y. Shen, H. Hu, W. Yin, T. Shiraiwa, M. Enoki:
"Effect of microstructure on the deformation of as-cast-Mg/LPSO two-phase alloys: An integrated SEM-DIC and crystal plasticity study"
Materialia 33 (2024) 102015–102015
- F. Briffod, K. Yasuda, T. Shiraiwa, M. H. Jhon, F. Gunawan, A. S. Budiman, M. Enoki:
"Effect of Microstructure on the Tensile and Fatigue Behavior of an Accumulative Roll Bonded Cu/Nb Laminate Material"
Materials Transactions 65 (2024) 167-176
2023
- T. Shiraiwa, N Hamada, F Briffod, M Enoki, K Hagihara:
"Synchronized Formation of Kink Bands in Al/Al2Cu Mille-Feuille Structured Alloy"
Materials Transactions 64 (2023) 735-743
- W. Yin, F. Briffod, H. Hu, T. Shiraiwa, M. Enoki:
"Three-dimensional configuration of crystal plasticity in stainless steel assessed by high resolution digital image correlation and confocal microscopy"
International Journal of Plasticity 170 (2023) 103762
- J. Zhu, F. Briffod, T. Shiraiwa, M. Enoki, S. Emura:
"High-Resolution Digital Image Correlation Analysis of Layered α/β Two-Phase Ti–12Mo Alloy under Compressive Condition"
Materials Transactions 64 (2023) 2677-2686
- H. Hu, F. Briffod, T. Shiraiwa, M. Enoki:
"Automated slip system identification and strain analysis framework using high-resolution digital image correlation data: Application to a bimodal Ti-6Al-4V alloy"
International Journal of Plasticity 166 (2023) 103618
- F. Briffod, T. Shiraiwa, K. Yamazaki, M. Enoki:
"Integrated experimental–numerical investigation of strain partitioning and damage initiation in a low-carbon lath martensitic steel"
Materials Science and Engineering A 876 (2023) 145148
- J. Zhu, F. Briffod, T. Shiraiwa, M Enoki, S. Emura:
"Kink band formation mechanism in α/β Ti-9Cr two-phase alloy"
Journal of Alloys and Compounds 939 (2023) 168736
- F. Briffod, H Hu, T. Shiraiwa, M Enoki:
"Effect of in-lath slip strength on the strain partitioning in a dual-phase steel investigated by high-resolution digital image correlation and crystal plasticity simulations"
Materials Science and Engineering A 862 (2023) 144413
- T. Shiraiwa, F Briffod, M Enoki:
"Prediction of Fatigue Crack Initiation of 7075 Aluminum Alloy by Crystal Plasticity Simulation"
Materials 16 (2023) 1595
- W. Yin, F. Briffod, H. Hu, K. Yamazaki, T. Shiraiwa, M Enoki:
"Quantitative investigation of strain partitioning and failure mechanism in ultrafine grained medium Mn steel through high resolution digital image correlation"
Scripta Materialia 229 (2023) 115386
2022
- T. Shiraiwa, S. Kato, F. Briffod, M. Enoki:
"Exploration of outliers in strength–ductility relationship of dual-phase steels"
Science and Technology of Advanced Materials: Methods 2 (2022) 175-197
- T. Shiraiwa, F Briffod, M Enoki, K Yamazaki:
"Inverse analysis of the relationship between three-dimensional microstructures and tensile properties of dual-phase steels"
Materials Today Communications 33 (2022) 104958
- F. Briffod, T. Shiraiwa, M. Enoki, S. Emura:
"Effect of macrozones on fatigue crack initiation and propagation mechanisms in a forged ti-6Al-4V alloy under fully-reversed condition"
Materialia 22 (2022) 101401
- F. Briffod, L. Hanqing, T. Shiraiwa, M. Enoki, S. Emura:
"Crystallography and deformation behavior of α phase precipitate at twin/matrix interface in a cold rolled metastable Ti-12Mo alloy"
Journal of Alloys and Compounds 892 (2022) 162234
- W. Yin, F. Briffod, T. Shiraiwa, M. Enoki:
"Mechanical properties and failure mechanisms of Mg-Zn-Y alloys with different extrusion ratio and LPSO volume fraction"
Journal of Magnesium and Alloys 10 (2022) 2158-2172
- H. Liu, F. Briffod, T. Shiraiwa, M. Enoki, S. Emura:
"Clustering Analysis of Acoustic Emission Signals during Compression Tests in Mille-Feuille Structure Materials"
Materials Transactions 63 (2022) 319-328
- J. Zhu, F. Briffod, T. Shiraiwa, M. Enoki, S. Emura:
"Potential kink band formation on α/β two-phase Ti-10Cr alloy under compressive condition"
Materials Science and Engineering A 849 (2022) 143538
- W. Yin, F. Briffod, K. Yamazaki, T. Shiraiwa, M Enoki:
"Effect of limited retained austenite on the strength–ductility trade-off in low-alloyed TRIP steel"
Materials Science and Engineering A 861 (2022) 144337
- T. Shiraiwa:
"Materials Development by Data-Driven Approach: Fatigue Prediction of Steel Materials by MInt"
PLASTOS 5 (2022) 208-211
- M. Enoki, T. Shiraiwa:
"Design of mechanical properties of structural materials using inverse problem analysis"
Journal of the Japanese Society for Strength and Fracture of Materials 55 (2022) 32-38
- S. Takemoto, T. Kaneshita, K. Nagata, Y. Okuno, J. Inoue, M. Enoki:
"Bayesian inverse design of high-strength aluminum alloys at high temperatures"
MRS Advances 7 (2022) 213–216
- T. Kasuya, M. Inomoto, Y. Okazaki, S. Aihara, M. Enoki:
"Stress-strain curve prediction of steel HAZ based on hardness"
Welding in the World 66 (2022) 273–285
- T. Kasuya, M. Inomoto, Y. Okazaki, S. Aihara, M. Enoki:
"Hardness prediction for sub-critically and inter-critically reheated HAZs of low alloy steels"
Welding in the World 67 (2023) 223–234
- H. Nishikawa, Y. Furuya, T. Kasuya, M. Enoki:
"Microstructurally small fatigue crack initiation behavior of fine and coarse grain simulated heat-affected zone microstructures in low carbon steel"
Materials Science and Engineering A 832 (2022) 142363
2021
- F. Briffod, T. Shiraiwa, M. Enoki:
"Micromechanical investigation of the effect of the crystal orientation on the local deformation path and ductile void nucleation in dual-phase steels"
Materials Science and Engineering A 826 (2021) 141933
- F. Briffod, T. Shiraiwa, M. Enoki:
"The effect of the 18R-LPSO phase on the fatigue behavior of extruded Mg/LPSO two-phase alloy through a comparative experimental-numerical study"
Journal of Magnesium and Alloys 9 (2021) 130-143
- T. Kasuya, M. Inomoto, Y. Okazaki, S. Aihara, M. Enoki:
"HAZ hardness prediction of boron-added steels"
Welding in the World 65 (2021) 1609–1621
- T. Kasuya, T. A.Yokobori, G. Ozeki, T. Ohmi, M. Enoki:
"Modelling of hydrogen diffusion in a weld cold cracking test: Part 2, numerical calculations"
ISIJ International 61 (2021) 1254-1263
- T. Kasuya, T. A. Yokobori, G. Ozeki, T. Ohmi, M. Enoki:
"Modelling of hydrogen diffusion in a weld cold cracking test: Part 1, experimental determinations of apparent diffusion coefficient and boundary condition"
ISIJ International 61 (2021) 1245-1253
2020
- T. Shiraiwa, K. Ishikawa, M. Enoki, I. Shinozaki, S. Kanazawa:
"Acoustic emission analysis using Bayesian model selection for damage characterization in ceramic matrix composites"
Journal of the European Ceramic Society 40 (2020) 2791-2800
- T. Shiraiwa, M. Kawate, F. Briffod, T. Kasuya, M. Enoki:
"Evaluation of hydrogen-induced cracking in high-strength steel welded joints by acoustic emission technique"
Materials and Design 190 (2020) 108573
- T. Shiraiwa, M. Enoki, S. Goto, T. Hiraide:
"Data Assimilation in the Welding Process for Analysis of Weld Toe Geometry and Heat Source Model"
ISIJ International 60 (2020) 1301-1311
- T. Shiraiwa, H. Takahashi, M. Enoki:
"Acoustic emission analysis during fatigue crack propagation by Bayesian statistical modeling"
Materials Science and Engineering A 778 (2020) 139087
- H. Nishikawa, Y. Furuya, S. Igi, S. Goto, F. Briffod, T. Shiraiwa, M. Enoki, T. Kasuya:
"Effect of microstructure of simulated heat-affected zone on low- to high-cycle fatigue properties of low-carbon steels"
Fatigue and Fracture of Engineering Materials and Structures 43 (2020) 1239-1249
- F. Briffod, T. Shiraiwa, M. Enoki:
"Nucleation and propagation modeling of short fatigue crack in rolled bi-modal Ti–6Al–4V alloy"
Materials Science and Engineering A 790 (2020) 139710
- F. Briffod, T. Shiraiwa, M. Enoki:
"Monotonic and cyclic anisotropies of an extruded Mg–Al–Ca–Mn alloy plate: Experiments and crystal plasticity studies"
Materials Science and Engineering A 772 (2020) 138753
- R. Sakaguchi, T. Shiraiwa*, P. Chivavibul, M. Enoki:
"Prediction of Fatigue Life of Steels in Consideration of Defect-induced Crack Initiation and Propagation"
ISIJ International 60 (2020) 799-806
- R. Sakaguchi, T. Shiraiwa*, P. Chivavibul, T. Kasuya, M. Enoki, N. Yamashita, H. Yokota, Y. Matsui, A. Kazama, K. Ozeki, H. Takamatsu:
"Multiscale Analysis of MnS Inclusion Distributions in High Strength Steel"
ISIJ International 60 (2020) 1714-1723
- S. Kato, F. Briffod, T. Shiraiwa, M. Enoki:
"Establishment of structure-property linkage of dual phase steels by two-point correlation"
Journal of the Japanese Society for Strength and Fracture of Materials 54 (2020) 50-53
- K. Okade, F. Briffod, T. Shiraiwa, M. Enoki:
"Analysis of low cycle fatigue behavior of Mg alloys by AE method and crystal orientation analysis"
Journal of the Japanese Society for Strength and Fracture of Materials 54 (2020) 54-57
- V. Gaur, F. Briffod, M. Enoki:
"Micro-mechanical investigation of fatigue behavior of Al alloys containing surface/superficial defects"
Materials Science & Engineering A 775 (2020) 138958
2019
- F. Briffod, A. Bleuset, T. Shiraiwa, M. Enoki:
"Effect of crystallographic orientation and geometrical compatibility on fatigue crack initiation and propagation in rolled Ti-6Al-4V alloy"
Acta Materialia 177 (2019) 56-67
- T. Shiraiwa, K. Tamura, M. Enoki:
"Analysis of kinking and twinning behavior in extruded Mg–Y–Zn alloys by acoustic emission method with supervised machine learning technique"
Materials Science & Engineering A 768 (2019) 138473
- T. Shiraiwa, Takao Murakami, M. Enoki:
"Effect of overload on fatigue crack growth behavior of thin copper foil"
International Journal of Fatigue 128 (2019) 105205
- F. Briffod, S. Ito, T. Shiraiwa, M. Enoki:
"Effect of long period stacking ordered phase on the fatigue properties of extruded Mg-Y-Zn alloys"
International Journal of Fatigue 128 (2019) 105205
- F. Briffod, T. Shiraiwa, M. Enoki:
"Numerical investigation of the influence of twinning/detwinning on fatigue crack initiation in AZ31 magnesium alloy"
Materials Science and Engineering A 753 (2019) 79-90
- Y. Miyazawa, F. Briffod, T. Shiraiwa*, M. Enoki:
"Prediction of Cyclic Stress–Strain Property of Steels by Crystal Plasticity Simulations and Machine Learning"
Materials 12 (2019) 3668
- V. Gaur, M. Enoki, T. Okada, S. Yomogida:
"A study on fatigue behavior of MIG-welded Al-Mg alloy with different fillerwire materials under mean stress"
Engineering Fracture Mechanics
- K. Wu, F. Briffod, K. Ito, I. Shinozaki, P. Chivavibul, M. Enoki:
"In-Situ Observation and Acoustic Emission Monitoring of the Initiation-to-Propagation Transition of Stress Corrosion Cracking in SUS420J2 Stainless Steel"
Materials Transactions
- K. Wu, K. Ito, I. Shinozaki, P. Chivavibul, M. Enoki:
"A Comparative Study of Localized Corrosion and Stress Corrosion Cracking of 13Cr Martensitic Stainless Steel Using Acoustic Emission and X-ray Computed Tomography"
Materials
2018
- T. Shiraiwa, Y. Miyazawa, M. Enoki:
"Prediction of Fatigue Strength in Steels by Linear Regression and Neural Network"
Materials Transactions, 60(2018), 189-198
- T. Shiraiwa, F. Briffod, M. Enoki:
"Development of integrated framework for fatigue life prediction in welded structures"
Engineering Fracture Mechanics 198 (2018) 158-170
- F. Briffod, T. Shiraiwa, M. Enoki:
"Numerical investigation of the influence of rolling texture and microstructure on fatigue crack initiation in BCC polycrystals"
International Journal of Fatigue 107 (2018) 72-82
- R. Hijikata, T. Shiraiwa*, M. Enoki, K. Matsubara, K. Tokumoto:
"Evaluation of mechanical properties of catheter shafts under cyclic bending"
Journal of the Japan Society of Powder and Powder Metallurgy 65 (2018) 301-306
- F. Briffod, T. Shiraiwa, M. Enoki:
"Modeling and Crystal Plasticity Simulations of Lath Martensitic Steel under Fatigue Loading"
Materials Transactions 60 (2018) 199-206
2017
- Y. Muto, T.Shiraiwa*, M. Enoki:
"Evaluation of the deformation behavior in directionally solidified Mg–Y–Zn alloys containing LPSO phases by AE analysis"
Materials Science and Engineering A, 689 (2017) 157-165
- R. Hijikata, T. Shiraiwa*, M. Enoki, K. Matsubara, K. Tokumoto:
"Evaluation of Mechanical Properties of Catheter Shafts under Cyclic Bending"
Materials Transactions, 58(2017), 1049-1054
- F. Briffod, T. Shiraiwa, M. Enoki:
"Microstructure modeling and crystal plasticity simulations for the evaluation of fatigue crack initiation in α-iron specimen including an elliptic defect"
Materials Science and Engineering A 695 (2017) 165-177
- T. Shiraiwa:
"Difficulties and Interests in Evaluating Damage Deterioration of Iron and Steel"
Bulletin of the Iron and Steel Institute of Japan 22 (2017)
2016
2015
- R. Kogure, T. Shiraiwa, M. Enoki, T. Suzuki:
"Evaluation of Torsional Fatigue Behavior of Coronary Stents"
Materials Transactions 56 (2015) 1257-1261
- F. Briffod, T. Shiraiwa, M. Enoki:
"Investigation of Static and Fatigue Behavior of Periodic Mesh Plates Using Acoustic Emission Method"
Materials Transactions
- K. Oguchi, M. Enoki and Naoya Hirata:
"Numerical Simulation for Cavitation Bubble Near Free Surface and Rigid Boundary"
Materials Transactions https://doi.org/10.2320/matertrans.M2014348
- K. Ito, H. Kuriki, H. Araki, S. Kuroda, and M. Enoki:
"Evaluation of Generation Mechanism of Vertical Cracks in Top Coat of TBCs During APS Deposition by Laser AE Method"
Journal of Thermal Spray Technology https://doi.org/10.1007/s11666-015-0247-x
2014
- T. Shiraiwa, M. Enoki:
"Effect of Specimen Shape on Fatigue Behavior in Thin Pure Copper Sheet for Smart Stress-memory Patch"
ISIJ International 54 (2014) 2342-2348
- F. Yuan, T. Shiraiwa, M. Enoki:
"Effects of Fabrication Method, Shape, Strain and Temperature on Conductive Properties of Smart Stress-Memory Patch"
Materials Transactions https://doi.org/10.2320/matertrans.MAW201404
- Y. Muto, K. Matsumoto, T. Shiraiwa, M. Enoki:
"Detection of Crack Propagation by AE and Evaluation of Fracture Toughness in Various Mg Alloys"
Journal of the Japan Institute of Metals and Materials 78 (2014) 381-387
- N. Ohashi, T. Shiraiwa, M. Enoki:
"Detection of Fracture in Structural Adhesive Using RFID Tags"
Materials Transactions 55 (2014) 1722-1726
-
K. Ito, Hitoshi Kuriki, Hiroshi Araki, Seiji Kuroda and M. Enoki "Detection of segmentation cracks in top coat of thermal barrier coatings during plasma spraying by non-contact acoustic emission method" Science and
Technology of Advanced Materials https://doi.org/10.1088/1468-6996/15/3/035007
2013
-
池田 翔, 伊藤海太, 南部将一, 榎 学
"レーザー誘起超音波を用いた薄板中の内部き裂の非破壊評価"
日本金属学会誌第77巻第9号(2013)402-407
-
Akira Toda, P. Chivavibul, and M. Enoki
"Effects of Plating Conditions on Electroless NiCoP Coating Prepared from Lactate-Citrate-Ammonia Solution"
Materials Transactions https://doi.org/10.2320/matertrans.M2012292
-
Petr Sedlak, YuichiroHirose, ManabuEnoki
"Acoustic emission localization in thin multi-layer plates using first-arrival determination"
Mechanical Systemsand Signal Processing https://dx.doi.org/10.1016/j.ymssp.2012.11.008
-
SABRINA A. KHAN, P. Chivavibul, PETR SEDLAK, SATOSHI ARAI, and M. Enoki
"Analysis of Acoustic Emission Signals during Tensile Deformation of Fe-Si Steels with Various Silicon Contents" METALLURGICAL AND MATERIALS
TRANSACTIONS A https://doi.org/10.1007/s11661-013-1729-4
2012
- T. Shiraiwa, M. Enoki:
"Strain-Controlled Fatigue Behavior in Thin Pure Copper Sheet for Smart Stress-Memory Patch"
Materials Transactions 53 (2012) 690-695
-
Takashi Yasutomi+ and M. Enoki
"In-Situ Evaluation of Detwinning Behavior in Extruded AZ31 Mg Alloy by AE"
Materials Transactions https://doi.org/10.2320/matertrans.MAW201218
-
Mitsuharu Shiwa, Hiroyuki Masuda, Hisashi Yamawaki, K. Ito and M. Enoki
"In-Situ Observation and Acoustic Emission Analysis for Corrosion Pitting of MgCl2 Droplet in SUS304 Stainless Steel+"
Materials Transactions https://doi.org/10.2320/matertrans.M2011399
-
Pang Hao, M. Enoki and Kumi Sakurai
"Finite Element Analysis of Tensile Fatigue Behavior of Coronary Stent"
Materials Transactions https://doi.org/10.2320/matertrans.MBW201116
-
Yunping Li, M. Enoki,
"Twinning behavior of pure magnesium quantitatively investigated by acoustic emission"
Materials Science & Engineering A https://doi.org/10.1016/j.msea.2011.10.010
-
T. Kasuya, Y. Hashiba, H. Inoue, T. Nose, K. Ito and M. Enoki
"COLD CRACKING SUSCEPTIBILITY OF AUSTENITIC AND MARTENSITIC WELD METALS"
Welding in the World volume 56, pages 76–84 (2012)
-
K. Ito, Hitoshi Kuriki, Makoto Watanabe, Seiji Kuroda and M. Enoki
"Detection of AE Events due to Cracks in TBC during Spraying Process"
Materials Transactions https://doi.org/10.2320/matertrans.MBW201118
2011
- T. Shiraiwa, M. Enoki:
"Fatigue Crack Length Measurement of Sputtered Metal Film for RFID-based Smart Stress Memory Patch"
ISIJ International 51 (2011) 1480-1486
- T. Shiraiwa, M. Enoki:
"Fatigue crack behavior of thin copper sheet and its application for smart stress-memory patch"
Strength, Fracture and Complexity 7 (2011) 205-214
- T. Shiraiwa, M. Enoki:
"Evaluation of Fatigue Properties of Steel Bar by Smart Stressmemory Patch"
ISIJ International 51 (2011) 250-255
-
P. Chivavibul, ManabuEnoki, Shigeru Konda, YasushiInada,Tamotsu Tomizawa, AkiraToda
"Reduction ofcorelossinnon-oriented(NO)electricalsteel by electroless-platedmagneticcoating"
Journal of Magnetismand Magnetic
Materialshttps://doi.org/10.1016/j.jmmm.2010.09.024
-
S. Ono, M. Enoki, L. Shen, K. Sakurai, S. Ohnishi, M. Nakamura
"Fatigue behavior and coating failure of polymer coated drug eluting stent"
https://doi.org/10.3233/SFC-2011-0138
-
Shoichi NAMBU and M. Enoki
"Monitoring of Acoustic Emission Activity of Smart Stress Memory Patch to Estimate Maximum Fatigue Stress for Structural Health Monitoring"
ISIJ Internationalhttps://doi.org/10.2355/isijinternational.51.88
-
K. Ito, M. Watanabe, S. Kuroda, M. Enoki:
"Evaluation of Cracking due to Dynamic Temperature Fluctuation during Plasma Spraying Process by Laser AE Method"
https://doi.org/10.3233/sfc-2011-0136